Parts

- Durable CrMo construction with 4-pawl internal engagement system - Fits left-hand (LH) threaded hubs only (allows mounting drivetrain on left side of bike for grinding on the right side) - Maintain with petroleum based lubricant (no wax/Teflon)

The squeeze of our levers is what dreams are made of. Most of our levers can be swapped to be run either front or rear, which is convenient if you like to your brakes reversed and a Godsend if you bust a lever in the middle of the woods. Avid levers are easy to install, simple to set up, and a pleasure to pull. - ReachAdjustment -- Qwik-Adjust Barrel Adjuster Bend Zone

Built around one of our original breakthrough designs, the Speed Dial 7 is the smooth and powerful way to control linear-pull or mechanical disc brakes. They are super easy to install and adjust so you can dial in the modulation just the way you like. - Compatible with mechanical disc brakes and linear-pull brakes. - Reach Adjust and Speed Dial Leverage Adjust - Reversible

The squeeze of our levers is what dreams are made of (and you know which dreams we're talking about). Most of our levers can be swapped to be run either front or rear, which is convenient if you like to your brakes reversed and a Godsend if you bust a lever in the middle of the woods. Avid levers are easy to install, simple to set up, and a pleasure to pull. - Reach Adjustment - Qwik-Adjust Barrel Adjuster - Compatible with mechanical disc brakes and linear-pull brakes

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

Need a replacement line for your Avid hydraulic disc brakes? You're covered with Avid's Hydraulic Line Kit. It's got 2000mm of hose for front or rear application, and all the fittings to work with your brakes.

- Precise fit and smooth function - Great cable travel range - Shielded cables for durability - Includes upper and lower cables - Use: 1-1/8" BMX

- Melt forged aluminum construction - 95mm arm length - Dual tension adjusters - Front/Rear: Either - Includes 55mm pads - 179g each

- Forged alloy V-brakes with 103mm arms - Brilliantly anodized in a variety of colors - Compatible with 70mm threaded brake pads - Front or rear - 21mm–35mm reach

The Nylo-Form pedals feature a low-profile, durable composite construction. - CrMo axle - Sealed bearings - Molded pins - Spindle size: 9/16-inch

- Wide tooth profiling prevents chain drop without a chainguide - Compatible with 9/10/11 speed chains, allowing a 1x setup on most drivetrains - Constructed in Canada from 7075 aluminum

In the Brooks tradition, this bar tape is made of natural leather to make it the perfect complement to your Brooks saddle. The bar tape comes in a kit including: - 2 strips of light, perforated leather bar tape - 2 rubber bar end plugs - 2 adhesive cloth strips

Campagnolo Upper Bolt and Springs

Campagnolo Upper Bolt and Springs

Campagnolo Upper Bolt and Springs

Record chains represent Campagnolo's highest quality and performance chains and are available in 9, 10 and 11 speed versions. - Chrome-Nickel-PTFE finish - Designed specifically for use with Campagnolo 8 and 9 speed drivetrains only - Links (links): 114 - Color: Silver - Width: 6.8 mm - Drivetrain Speeds: 9 - Chain Connection Type: Pressed Pin - Half Link Chain: No - Weight: 300 grams

Compatible only with Record or Chorus square taper cranks. Features three cartridge bearings and a chromoly steel spindle. - 3 sealed cartridge bearings, 2 on the drive side, 1 on the non-drive side - Removable cups are machined from 7000 series aluminum - Unique taper is not compatible with Shimano - Weight: 220 grams

Campagnolo's Centaur Cassette offers precise, fluid shifting thanks to Campy's Ultra-Drive system. The teeth are carefully machined and treated for flawless gear changes and outstanding durability. Plus, the special cog patterns interface perfectly with the rest of Campy's drivetrain components for outstanding shifting.

Replacement inserts for Thudbuster G4 suspension seatposts. - Cane Creek ST G4 Elastomer Insert - X-Firm

Replacement elastomers for Thudbuster LT suspension seatposts allow the rider to tune for weight.

Replacement elastomers for Thudbuster LT suspension seatposts allow the rider to tune for weight.

• Replacement hoods for road brake levers with traditional, non-aero cable routing • Soft, tacky rubber for a sure grip • Available in black or brown

Protects Cane Creek Thudbuster moving parts from grit and grime. - Neoprene construction

Replacement inserts for Thudbuster G4 suspension seatposts. - Cane Creek LT G4 Elastomer Insert - Firm

Replacement inserts for Thudbuster G4 suspension seatposts. - Cane Creek LT G4 Elastomer Insert - X-Firm

Cane Creek's Aheadset is a simple, affordable solution for your headset needs. • Bearing Type: Cup and Cone • Color: Black • Crown Race: 30 • Defined Color: Black • Lower Stack Height: 12 mm • S.H.I.S Lower: EC34 • S.H.I.S Upper: EC34 • S.H.I.S. Stem Clamp Diameter: 28.6 • Upper Stack Height: 18 mm • Weight: 165 g

40-Series Bearing - Compatible with 110-, 40-, and 10-Series headsets

Hellbender bearings have an improved seal structure and are cross compatible with Cane Creek headsets.

Replacement clamp kit for Thudbuster G4.