Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Shoes

$450.00
The S-Works Torch is the latest evolution of the winningest footwear in cycling. Using Body Geometry together with biomimicry, data science, and obsessive craftsmanship, we engineered a shoe so thoughtfully constructed that you'll forget you're wearing it. Leveraging data science, we refined every detail of the S-Works Torch's upper for improved fit and performance. The BOA cable is shifted down and angled, preventing lift on the ball of the foot and delivering power-enhancing structure while eliminating unwanted pressure or pinching. Adaptive materials allow natural movement of the foot where needed for comfort, while data-driven zonal reinforcement keeps the foot secured for crisp power delivery and optimal efficiency. Guided by more than 100,000 foot scans from our RETÜL fit data, we recognized that both a standard and a wide carbon base plate would best serve the spectrum of human foot shapes. An internal I-Beam adds stiffness and strength, eliminating the need for additional bracing. The result is a 20-gram weight reduction, enhanced efficiency, and immediate power transfer. Following RETÜL bio-mechanical data, we created an asymmetric heel cup that supports natural knee alignment and delivers the positive hold riders love while enhancing comfort by accommodating more room for the Achilles heel. The S-Works Torch is scientifically crafted to disappear on your feet and off the front. - New upper features reinforcement in key zones while also offering adaptive fit zones to create a disappearing fit on the foot. - Based on data gathered from Retul foot scans, the new base plate is 4mm wider at the ball than the previous generation of S-Works 7 shoe. - By optimizing its construction, the new carbon plate is 20g lighter than the S-Works 7. An internal "I-Beam" ensures it maintains the same stiffness as the previous generation. - An updated last makes use of Retul data to better match the shape of riders' feet, sloping more towards the lateral side to give a snug, close-to-foot fit. - Asymmetrical heel counter supports the medial side while removing material from the lateral side, allowing for a lower collar. - Updated BOA cable routing improves lockdown while reducing pressure across anterior ankle ligaments. - Independent alloy BOA S3-Snap Fit System for on-the-fly micro-adjustment, backed by the BOA Guarantee. - Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. Three-bolt cleat pattern fits all major road pedals. - Non-slip, replaceable heel tread with internally recessed screws for security. - IMPORTANT FOR WIDE FIT—the new base plate is 4mm wider than the standard width (8mm wider than S-Works 7).
$450.00
The S-Works Torch is the latest evolution of the winningest footwear in cycling. Using Body Geometry together with biomimicry, data science, and obsessive craftsmanship, we engineered a shoe so thoughtfully constructed that you’ll forget you’re wearing it. Leveraging data science, we refined every detail of the S-Works Torch’s upper for improved fit and performance. The BOA cable is shifted down and angled, preventing lift on the ball of the foot and delivering power-enhancing structure while eliminating unwanted pressure or pinching. Adaptive materials allow natural movement of the foot where needed for comfort, while data-driven zonal reinforcement keeps the foot secured for crisp power delivery and optimal efficiency. Guided by more than 100,000 foot scans from our RETÜL fit data, we recognized that both a standard and a wide carbon base plate would best serve the spectrum of human foot shapes. An internal I-Beam adds stiffness and strength, eliminating the need for additional bracing. The result is a 20-gram weight reduction, enhanced efficiency, and immediate power transfer. Following RETÜL biomechanical data, we created an asymmetric heel cup that supports natural knee alignment and delivers the positive hold riders love while enhancing comfort by accommodating more room for the Achilles heel. The S-Works Torch is scientifically crafted to disappear on your feet and off the front. - New upper features reinforcement in key zones while also offering fit zones to create a disappearing fit on the foot. - Based on data gathered from Retül foot scans, the new base plate is 4mm wider at the ball than the previous generation of S-Works 7 shoe. - By optimizing its construction, the new carbon plate is 20g lighter than the S-Works 7. An internal "I-Beam" ensures it maintains the same stiffness as the previous generation. - An updated last makes use of Retül data to better match the shape of riders' feet, sloping more towards the lateral side to give a snug, close-to-foot fit. - Asymmetrical heel counter supports the medial side while removing material from the lateral side, allowing for a lower collar. - Updated BOA cable routing improves lockdown while reducing pressure across anterior ankle ligaments. - Independent alloy BOA S3-Snap Fit System for on-the-fly micro-adjustment, backed by the BOA Guarantee. - Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. Three-bolt cleat pattern fits all major road pedals. - Non-slip, replaceable heel tread with internally recessed screws for security. *** IMPORTANT FOR WIDE FIT*** the new base plate is 4mm wider than the standard width (8mm wider than S-Works 7).
$239.99 - $269.99
The Politex material is constructed of several overlapping layers with different physical and mechanical properties. This compacted PVC is then coupled to two fabrics (knitted fabric and felt) that is then film dyed for long-lasting color retention. Politex offers strong resistance to rips, lacerations, stretching and fading. Politex is made in strict compliance with European regulations and is considered a "green” product. The Soft Instep 3 Closure System is a wide, anatomically curved strap combined with a soft, thermo-formed EVA pad that distributes pressure evenly over the instep area. The Soft Instep Closure System is adjustable from both sides to perfectly center the EVA pad over a high or low instep. The system eliminates the need for the High Instep Extender. The Soft Instep Closure System is replaceable. Sidi's Techno-3 System dials in fit along the entire length of the shoe, adapting the upper to the shape of the foot for a customized fit. Sidi's famously reliable and replaceable closures are improved by an all-new proprietary Sidi Wire material that is completely non-binding for intuitive and effortless on-the-fly adjustments. Like most Sidi small parts, the Techno-3 Buckle is serviceable and replaceable. The MTB RS17 SOLE consists of a nylon and PU blend. This sole is lighter than the traditional competition sole and has been updated with a more aggressive tread pattern and a replaceable toe tread insert. The reinforced heel keeps the foot in an optimal position and avoids the shoe being deformed by extreme performance or prolonged pressure. - Wide EE-EEE width last for wider fit.
$40.00
Body Geometry Footbeds are ergonomically designed and scientifically tested to increase power, endurance, and comfort by optimizing hip, knee, and foot alignment. With three different arch support options (Red+ being the lowest, Blue++ being in the middle, and Green+++ being tallest), you can be sure that every precious watt is preserved through the pedal stroke. - Body Geometry Footbeds measurably increase power, reduce time to exhaustion, and reduce injury by aligning hip, knee, and foot. - Customized longitudinal arch and metatarsal support with Red+, Blue++, or Green+++ contour. - Proprietary lightweight foam avoids taking a compression set for long-lasting performance. - Combine Body Geometry shoes, footbeds, and wedges to maximize performance benefits.
$50.00
Serfas' Astro MTB Shoes offer lightweight, breathable performance. Stiff soles give you maximum power transfer, while aggressive lugs provide excellent traction. Plus, double Velcro closures and easy-release buckle straps ensure a secure and custom fit. - Lightweight - High efficiency ventilation - Serfas' Power Transfer footbeds & Coolflow Technology - Triple density soles - Wide toe boxes for comfort - Easy-release buckles - Walkable soles - Toe cleats included
$299.99 - $324.99
Microtech Microfiber incorporates features of resistance, stability, lightness, transpirability, water-repellency and eco-friendliness. It is manufactured using the "Water-Tech” water treatment: - Lower environmental impact - Less noxious emissions into the air and into the work environment - Water-based products, not solvents, were used, which is beneficial to the environment as well as the final user. The Soft Instep 4 Closure System is a wide, anatomically curved strap combined with a soft, thermo-formed EVA pad that distributes pressure evenly over the instep area. The Soft Instep Closure System is adjustable from both sides, to perfectly center the EVA pad over a high or low instep. The system eliminates the need for the High Instep Extender. The Soft Instep Closure System is replaceable. Sidi's Techno-3 System dials in fit along the entire length of the shoe, adapting the upper to the shape of the foot for a customized fit. Sidi's famously reliable and replaceable closures are improved by an all-new proprietary Sidi Wire material that is completely non-binding for intuitive and effortless on-the-fly adjustments. Like most Sidi small parts, the Techno-3 Buckle is serviceable and replaceable. - Reinforced heel cup. - The MTB RS17 SOLE consists of a Nylon and PU blend. This sole is lighter than the traditional competition sole and has been updated with a more aggressive tread pattern and a replaceable toe tread insert. - Regular "D" width last for precise fit.
$70.00
Serfas' Podium Road Shoes are the perfect choice for superior performance and comfort. - Serfas' Syn-Tech lightweight uppers - Serfas' Power Transfer footbeds & Coolflow Technology for excellent ventilation - Wide toe boxes for comfort - Single-button release buckles - Stiff, easy-walking rubber soles perfect for the road or indoor cycling classes
$450.00
The S-Works Torch is the latest evolution of the winningest footwear in cycling. Using Body Geometry together with biomimicry, data science, and obsessive craftsmanship, we engineered a shoe so thoughtfully constructed that you'll forget you're wearing it. Leveraging data science, we refined every detail of the S-Works Torch's upper for improved fit and performance. The BOA cable is shifted down and angled, preventing lift on the ball of the foot and delivering power-enhancing structure while eliminating unwanted pressure or pinching. Adaptive materials allow natural movement of the foot where needed for comfort, while data-driven zonal reinforcement keeps the foot secured for crisp power delivery and optimal efficiency. Guided by more than 100,000 foot scans from our RETÜL fit data, we recognized that both a standard and a wide carbon base plate would best serve the spectrum of human foot shapes. An internal I-Beam adds stiffness and strength, eliminating the need for additional bracing. The result is a 20-gram weight reduction, enhanced efficiency, and immediate power transfer. Following RETÜL bio-mechanical data, we created an asymmetric heel cup that supports natural knee alignment and delivers the positive hold riders love while enhancing comfort by accommodating more room for the Achilles heel. The S-Works Torch is scientifically crafted to disappear on your feet and off the front. - New upper features reinforcement in key zones while also offering adaptive fit zones to create a disappearing fit on the foot. - Based on data gathered from Retul foot scans, the new base plate is 4mm wider at the ball than the previous generation of S-Works 7 shoe. - By optimizing its construction, the new carbon plate is 20g lighter than the S-Works 7. An internal "I-Beam" ensures it maintains the same stiffness as the previous generation. - An updated last makes use of Retul data to better match the shape of riders' feet, sloping more towards the lateral side to give a snug, close-to-foot fit. - Asymmetrical heel counter supports the medial side while removing material from the lateral side, allowing for a lower collar. - Updated BOA cable routing improves lockdown while reducing pressure across anterior ankle ligaments. - Independent alloy BOA S3-Snap Fit System for on-the-fly micro-adjustment, backed by the BOA Guarantee. - Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. Three-bolt cleat pattern fits all major road pedals. - Non-slip, replaceable heel tread with internally recessed screws for security. - IMPORTANT FOR WIDE FIT—the new base plate is 4mm wider than the standard width (8mm wider than S-Works 7).
$45.00 - $90.00 $90.00 Up to 50% Off
Whether heading to the gym or the coffee shop, Specialized's Cadets are an excellent balance of pedaling performance with off-the-bike cushioning and stability. They feature a Body Geometry sole and footbed for optimum alignment of hip, knee, and foot to improve performance and comfort. With a 2-bolt cleat plate, the Cadet enhances pedaling efficiency yet maintains off bike comfort. The mesh upper is breathable and comfortable, while traditional laces with Lacelock allow for easy adjustment.
$59.99 $120.00 50% Off
Designed for pushing the limits of enduro racing and trail riding, Specialized's 2FO ClipLite Lace delivers pedal connection, comfort, and protection in a simplified lace-up version. This ultra-light version of the popular 2FO Clip is engineered for smooth pedal entry and exit with the Landing Strip cleat pocket, meaning you can focus on going fast on the descent, without the weight penalty for your climb back to the top. It’s foot out, flat out—on a diet. - Body Geometry sole construction and footbed: ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce chance of injury by optimizing hip, knee, and foot alignment. - Landing Strip cleat pocket is optimized for effortless foot-out riding style with platform clip pedals. - Lacelock elastic keeps laces out of the chainrings. - Stiff Lollipop nylon composite plate for high performance pedaling and off bike comfort. - SlipNot rubber sole for confident traction. - Asymmetric toe box protection where you need it. - Extended length cleat slot (4mm) for rearward cleat set up option. - Smooth thermobonded upper for lightweight durability and a snag-free profile. - Cushioned EVA midsole for comfort with molded heel cup for stability. - Standard Fit last for a balance of pedal feel and off-bike comfort. - Two-bolt cleat pattern fits all major MTB pedals. - Approximate weight: 379g (1/2 pair, size 42)
$425.00
Finding the perfect cross country race shoes can be tough going, but with the S-Works Recon shoes, we've made the choice simple. Exceptional power transfer? Check. Gram-counter approved? Check. Undeniable style? You got it. With the S-Works Recon you get XC-focused mountain bike shoes that truly have no compromises. We took a no-holds-barred approach to transferring every bit of your power to the pedals. The sole utilizes a rubber toe and heel for superior off-the-bike traction, while the pontoons are made of a harder TPU to provide excellent stability and power transfer to the pedal. A completely refined Padlock Heel, meanwhile, packs in more comfort with the same exceptional heel hold that you found in the previous iteration. And finally, the space-grade Dyneema material used in the upper doesn't stretch when pulled on, making sure that your foot stays where it's supposed to. With all of these features combined, you can be sure that we've kept in line with the motto "every watt is sacred." In the comfort arena, we kept all of the Body Geometry features you know and love, like the Longitudinal Arch, Varus Wedge, and Metatarsal Button. Each one of these features have been ergonomically designed and scientifically tested to not only boost power, but also to increase efficiency and reduce the risk of injury. We also took luxury into account by designing the S-Works Recon to have form that complements its function, so you'll find seams that are bonded together, rather than sewn, cleaning up the lines and contouring to your foot with slipper-like comfort. The custom CNC'd alloy Boa dials add some panache, but they also feature durable spring clutch internals and precise, one-millimeter micro-adjustments that let you perfectly dial-in your fit. The S-Works Recon embodies everything we know about footwear, compacted into one shoe with no compromises, no shortcuts—just explosive speed and superior comfort. - Body Geometry sole and footbed are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment. - Our stiffest and lightest XC FACT carbon plate maximizes power transfer: Stiffness Index 13.0 - Dyneema Mesh is trapped between layers of four-way stretch mesh and TPU to create no-stretch zones for the ultimate connection and comfort. - Independent alloy BOA S3-Snap dials for on-the-fly micro-adjustment, backed by the BOA Lifetime Guarantee. - PadLock heel construction cradles the heel and is proven to improve acceleration. - Titanium alloy cleat nut. - SlipNot rubber heel and toe tread for confident traction on all terrain with removable toe studs. - Form Fit last with a roomy toe box for the ultimate in connectivity and comfort. - Two-bolt cleat pattern fits all major MTB pedals. - Approximate weight: 270g (1/2 pair, Size 42)
$399.99
Dedicated to the strongest conformations, the Sidi Dragon 5 Mega guarantees a perfect feeling of comfort even for those with a wider sole or high instep, ensuring comfort, rigidity and performance. -The Soft Instep Closure System is a wide, anatomically curved strap combined with a soft, thermo-formed EVA pad that distributes pressure evenly over the instep area -Tecno-3 System dials in fit along the entire length of the shoe, adapting the upper to the shape of the foot for a customized fit -The reinforced heel cup stabilizes and supports the heel. Anatomically shaped plastic, reduces heel slip and provides increased power transfer -The MTB SRS Carbon-Ground Sole raises the standard for mountain bike performance, dropping off about 100 grams per pair compared to the previous Dragon Carbon SRS sole without sacrificing power or durability -The MTB SRS Carbon-Ground Sole uses replaceable tread blocks in the heel and the toe - The Ground SRS treads and MTB Plate are easily removable and replaceable
$170.00
The Torch 2.0 Road shoes are all about comfort—well, comfort and performance that is. Due to the materials, road shoes often feel stiff and uncomfortable. We decided to address this annoyance head on, though. To do so, we've implemented a 100% mesh and TPU construction on the Torch 2.0 that allows for more wiggle room in the toe box and a less constrictive, sock-like feel. The upper is then paired with our medium-stiffness FACT carbon sole and a rubber heel and toe that provide the perfect degree of off-the-bike traction. For the closure, we added a single lightweight Boa® IP1 dial that features tool-free snap replacement capability, while also providing simple, on-the-fly micro-adjustments. - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce chance of injury by optimizing hip, knee, and foot alignment. - Carbon sole with a 7.0 Stiffness Index is engineered to be moderately stiff, yet light with a rubber heel and toe for off-the-bike traction. - Lightweight Boa® IP1 Fit System for on-the-fly micro-adjustment, backed by the Boa Guarantee. - Mesh and TPU upper for a supple fit. - Three-bolt cleat pattern fits all major road pedals. - Approximate weight: 235g (1/2 pair, Size 42)
$425.00
Whether it's a sweltering climb at the Vuelta or a toasty afternoon in your hometown, we developed the S-Works 7 Vent to keep you comfortable on even the hottest days. With new features like the Vented Mouthport toe box and an all-new engineered mesh upper, the S-Works 7 Vent delivers exceptional ventilation and aides in sweat evaporation. Pair that with World-Tour-proven features like our Body Geometry Longitudinal Arch, Varus Wedge, and personalized insoles with a Metatarsal Button, the PadLock heel, a FACT Powerline carbon outsole, and machined alloy BOA S3-Snap dials, and you're set for any ride or race, no matter how high the mercury rises. For power transfer, our PadLock heel construction cradles the heel to ensure optimal power transfer. In fact, its been scientifically-proven to improve acceleration. Pair that with two independent, alloy BOA S3-Snap dials backed by the BOA Lifetime Guarantee, and you can fine-tune your level of foot-hold on-the-fly. The Vented Mouthport toe box pulls air in through the front of the shoe and channels it around your feet, while the entirely-new, engineered mesh upper and tongue let that air flow freely throughout the shoe, aiding in both cooling and sweat evaporation. Along with the engineered mesh in the upper, we added a layer of Dyneema Mesh to keep strong hold of your foot, ensuring pro-proven power transfer. The key to more comfort, fewer injuries, and higher power output comes from our ergonomically designed, scientifically tested Body Geometry Features, Longitudinal Arch, Varus Wedge, and personalized insoles with a Metatarsal Button. When used in harmony, these three features align the hip, foot, and knee, while also limiting medial/lateral knee movement and maintaining good circulation down to your toes. - Non-slip, replaceable heel tread with internally recessed screws for security. - Three-bolt cleat pattern fits all major road pedals. - Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. - Uses the same 66-gram FACT Powerline carbon outsole found in our EXOS line. With its mesh-covered ventilation holes, the sole furthers the shoe's cooling properties, all while dropping weight to 233 grams (1/2 pair, Size 42).
$67.50 - $90.00 $90.00 Up to 25% Off
The Specialized Women's Tahoe mountain bike shoes were designed to deliver rugged and dependable off-road performance, especially if your rides see a good deal of hiking. To do so, they feature a SlipNot rubber outsole for added grip over roots and wet terrain. And to keep the shoes stiff enough for riding and flexible enough for walking, they also have a Lollipop inner plate that sits in a bed of comfy EVA padding. The fit is relaxed for everyday use, and the Body Geometry sole provides ergonomically designed comfort and efficiency. - Body Geometry sole construction and footbed: ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce chance of injury by optimizing hip, knee, and foot alignment. - SlipNot rubber compound developed in Specialized's tire lab optimizes shoe and pedal connection. - Stiff Lollipop inner plate delivers high performance pedaling, and it sits in a bed of EVA to soften landings and maintain off-the-bike traction. - Relaxed Fit for a balance of pedal feel and walking comfort. - Lacelock elastic keeps laces out of chainrings. - Body Geometry Footbeds measurably increase power, reduce time to exhaustion, and reduce injury by aligning hip, knee, and foot. - Toe and heel overlays provided added abrasion resistance. - Approximate weight: 325g (1/2 pair, size 39)
$225.00 - $230.00
The Recon 3.0 is all about putting the legendary performance of our S-Works Recon - power transfer, comfort, light weight, style - in a package perfect for the XC and gravel rider. Starting with Body Geometry, Recon 3.0 delivers comfort and efficiency, with features that stand-out off the beaten path. Looking for in the saddle speed as well as off-bike performance? Recon 3.0 mates a carbon outsole with a Pave-inspired glass fiber forefoot to create Carbon STRIDE toe-flex, which lets your foot function naturally off the bike, yet still provides incredible power transfer with a stiffness index of 10.0. Whether you're flying up a run-up on the 'cross course or strolling into the brewhouse post ride, STRIDE toe-flex is a game changer. We know venturing off-road means venturing into the unknown, so we've given the Recon 3.0 XPEL Mesh to create a comfortable fit that sheds water, keeping the shoe light and making it dry as fast as it rides. Our SlipNot compound provides full rubber coverage of the outsole for off bike traction on any surface, with open treads to eject mud. Dual L6-Snap Boas and a Velcro forefoot closure ensure micro adjustable comfort with a secure fit designed for all day comfort and performance, whether your ride calls for open gravel, twisting single track, and more than your fair share of hike-a-bike. - Body Geometry sole and footbed are built with purpose and backed by science to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment. - Carbon STRIDE toe-flex technology allows for natural toe movement off-bike but remains stiff for pedaling: Stiffness Index 10.0) - Fully-welded upper reduces seams for superior step-in comfort. - Independent BOA L6-Snap dials for on-the-fly micro-adjustment. - SlipNot rubber tread for confident traction on all terrain with removable toe studs. - Two-bolt cleat pattern fits all major MTB pedals. - Approximate weight: 355g (1/2 pair, Size 42)
$160.00 - $170.00
Built for high-alpine terrain, the Rime 2.0 brings rugged capability to ensure you can conquer any mountain trail. XPEL mesh lining sheds while you shred, preventing the shoe from becoming water-logged in creek crossings and will dry overnight. Our Lollipop midsole construction is paired with a gnarly Vibram rubber outsole creating superb/unmatched off-bike push-ability for getting over any unrideable terrain. For closure, a standard lace is paired with an L6 Boa for a precise fit, on-bike adjustability, and redundancy to keep you riding when you're in the backcountry. - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce chance of injury by optimizing hip, knee, and foot alignment. - XPEL hydrophobic mesh construction reduces water absorption and dramatically improves drying time. - Landing Strip cleat pocket is optimized for effortless foot-out riding style with platform clip pedals. - Boa L6-Snap dials for easy adjustment, backed by the Boa Lifetime Guarantee - Stiff Lollipop nylon composite plate for high performance pedaling and off-the-bike comfort. - Vibram rubber sole for confident traction - Relaxed Fit for a balance of pedal feel and off-bike comfort - Two-bolt cleat pattern fits all major mountain pedals. - Approximate weight: 384g (1/2 pair, size 42)
$34.00
Step into stiff pedal efficiency with Serfas' Palladium Road Shoes. The triple compound soles maximize your pedal power, and the reinforced heels provide added fit while keeping the shoes' weight down. They're comfortable, too, as the light Syn-Tech uppers breathe nicely so you'll feel great come the town-line sprint. And when it's time to take them off, the simple single-button release buckle is a snap. - 325 grams (size 44)
$425.00
A few notes on this shoe -- This product combines our SW Vent upper with our race winning SW Recon outsole to create a one-of-a-kind shoe perfect for long hot days in the saddle. We see this product as the ultimate gravel racing product for hot summer races. - Built with Purpose. Backed by Science. Our Body Geometry trio of the Longitudinal Arch, Metatarsal Button, and Varus Wedge work together to increase efficiency, optimize hip, knee, and foot alignment, and reduce injury risks. - The Vented Mouthport toe box pulls air in through the front of the shoe and channels it around your feet, while the entire-new, engineered mesh upper and tongue let that air flow freely throughout the shoe—aiding in both cooling and sweat evaporation. Along with the engineered mesh in the upper, we added a layer of Dyneema Mesh to keep strong-hold of your foot, ensuring pro-proven power transfer. - Our stiffest and lightest XC FACT carbon plate maximizes power transfer: Stiffness Index 13.0 - For power transfer, our PadLock heel construction cradles the heel to ensure optimal power transfer. In fact, it’s been scientifically-proven to improve acceleration. Pair that with two independent, alloy BOA S3-Snap dials backed by the BOA Lifetime Guarantee, and you can fine-tune your level of foot-hold on-the-fly. - Two independent, alloy BOA S3-Snap dials backed by the BOA Lifetime Guarantee so you can fine-tune your level of foot-hold on-the-fly. - Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. - SlipNot rubber heel and toe tread for confident traction on all terrain with removable toe studs. - Two-bolt cleat pattern fits all major MTB pedals.
$400.00 - $425.00
What makes the perfect cycling shoe? Is it exceptional power transfer? Superior Comfort? Undeniable style? The simple answer is 'yes' to all of the above. With the S-Works 7, you get a shoe with no compromises. We took a no holds barred approach to transferring every bit of your power to the pedals. The lighter and stiffer Powerline carbon sole is new and brought to you by the same team that developed Rider-First Engineering. Why's this special? Because it led to their lightest and stiffest carbon outsole to date. A completely refined Padlock Heel, meanwhile, packs in more comfort with the same exceptional heel hold that you found in the previous iteration. And finally, the space-grade Dyneema material used in the upper doesn't stretch when pulled on, making sure that your foot stays where it's supposed to. With these all features combined, you can be sure that Specialized kept in line with the motto "every watt is sacred." In the comfort arena, Specialized kept all of the Body Geometry features you know and love, like the Longitudinal Arch, Varus Wedge, and Metatarsal Button. Each one of these features have been ergonomically designed and scientifically tested to not only boost power, but also to increase efficiency and reduce the risk of injury. They also took luxury into account by designing the S-Works 7 to have form that complements its function, so you'll find seams that are bonded together, rather than sewn, cleaning up the lines and contouring to your foot with slipper-like comfort. The custom CNC'd alloy BOA dials add some panache, but they also feature durable spring clutch internals and precise, one-millimeter micro-adjustments that let you perfectly dial in your fit. The S-Works 7 embodies everything Specialized knows about footwear, compacted into one shoe–no compromises, no shortcuts, just explosive speed and superior comfort. - Body Geometry sole and footbed are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment. - Specialized's stiffest and lightest FACT Powerline carbon plate maximizes power transfer: Stiffness Index 15.0 - Dyneema Mesh is trapped between layers of four-way stretch mesh and TPU to create no-stretch zones for the ultimate connection and comfort. - Independent alloy BOA S3-Snap dials for on-the-fly micro-adjustment, backed by the BOA Lifetime Guarantee. - PadLock heel construction cradles the heel and is proven to improve acceleration - Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. - Non-slip, replaceable heel tread with internally recessed screws for security. - Form Fit last with a roomy toe box for the ultimate in connectivity and comfort. - Three-bolt cleat pattern fits all major road pedals. - Approximate weight: 224g (1/2 pair, Size 42)
$82.50 - $110.00 $100.00 - $110.00 Up to 25% Off
Remarkable performance and value make the Specialized Sport MTB shoes a remarkable pair of mountain bike shoes. This durable, lightweight shoe features Body Geometry fit, comfortable offset Velcro closures, and a sole with improved traction for hiking. - Body Geometry sole construction and footbed: ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment. - Injection-molded nylon composite outsole with rubber tread for moderate pedaling stiffness and phenomenal trail traction: Stiffness Index 6.0. - Three-strap offset Velcro closure for comfortable fit. - Durable synthetic leather and vented mesh upper. - Combine Body Geometry shoes, footbeds, and wedges to maximize performance benefits. - Standard Fit for all-day comfort. - Two-bolt cleat pattern fits all major MTB pedals. - Approximate weight: 360g (1/2 pair, size 42)
$170.00
The Torch 2.0 Road shoes are all about comfort—well, comfort and performance that is. Due to the materials, road shoes often feel stiff and uncomfortable. We decided to address this annoyance head on, though. To do so, we've implemented a 100% mesh and TPU construction on the Torch 2.0 that allows for more wiggle room in the toe box and a less constrictive, sock-like feel. The upper is then paired with our medium-stiffness FACT carbon sole and a rubber heel and toe that provide the perfect degree of off-the-bike traction. For the closure, we added a single lightweight Boa® IP1 dial that features tool-free snap replacement capability, while also providing simple, on-the-fly micro-adjustments. - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce chance of injury by optimizing hip, knee, and foot alignment. - Carbon sole with a 7.0 Stiffness Index is engineered to be moderately stiff, yet light with a rubber heel and toe for off-the-bike traction. - Lightweight Boa® IP1 Fit System for on-the-fly micro-adjustment, backed by the Boa Guarantee. - Mesh and TPU upper for a supple fit. - Three-bolt cleat pattern fits all major road pedals. - Approximate weight: 235g (1/2 pair, Size 42)
$160.00
The Comp Mountain Bike shoes take a whole lot of comfort, mix it with some serious pedaling efficiency, and add a layer of grippy trail traction for good measure. The result is a feature-packed and reliable all mountain shoe that delivers the right mix of performance and durability for a variety of trail conditions. Designed with Body Geometry attributes at the forefront, the comfortable fit and stiff sole provide maximum pedal efficiency and power transfer. The Boa S2-SV dial, meanwhile, is easily replaceable without using any tools, and it allows for on-the-fly fit adjustments. The materials used in the construction are also designed to take a beating, whether it be an accidental root or rock strike, while the SlipNot tread gives you reliable trail traction when you need it. - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment. - Injection-molded nylon composite outsole with SlipNot rubber tread for moderate pedaling stiffness and phenomenal trail traction: Stiffness Index 6.0. - Single Boa S2-SV dial for on-the-fly micro-adjustment, backed by the Boa Lifetime Guarantee. - Dial & lace assembly is replaceable in seconds with Snap cartridge system. - Hard-molded toe kick for protection and durability. - Stitched synthetic and mesh upper with asymmetric strap closure for a comfortable fit. - Two-bolt SPD-style cleat pattern fits all major MTB pedals. - Standard Fit last for all-day comfort. - Replaceable toe studs. - Multiple widths available. - Approximate weight: 365g (1/2 pair, Size 42)
$45.00 - $90.00 $90.00 Up to 50% Off
Specialized's Tahoe mountain bike shoes were designed to deliver rugged and dependable off-road performance, especially if your rides see a good deal of hiking. To do so, they feature a SlipNot rubber outsole for added grip over roots and wet terrain. And to keep the shoes stiff enough for riding and flexible enough for walking, they also have a Lollipop inner plate that sits in a bed of comfy EVA padding. The fit is relaxed for everyday use, and the Body Geometry sole provides ergonomically designed comfort and efficiency. - Body Geometry sole construction and footbed: ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce chance of injury by optimizing hip, knee, and foot alignment. - SlipNot rubber compound developed in Specialized's tire lab optimizes shoe and pedal connection. - Stiff Lollipop inner plate delivers high performance pedaling, and it sits in a bed of EVA to soften landings and maintain off-the-bike traction. - Relaxed Fit for a balance of pedal feel and walking comfort. - Lacelock elastic keeps laces out of chainrings. - Body Geometry Footbeds measurably increase power, reduce time to exhaustion, and reduce injury by aligning hip, knee, and foot. - Toe and heel overlays provide added abrasion resistance. - Approximate weight: 350g (1/2 pair, size 42)
$100.00
Whether you find yourself in the gym sweatin' in spin class or out on the open road, our Women's Remix Road shoes are here to provide ample performance and comfort. They're loaded to the gills with comfortable, performance-enhancing Body Geometry features, and they also have highly breathable upper and easy-to-use laces. Consider them a simple, no-nonsense footwear solution to your active lifestyle. - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce chance of injury by optimizing hip, knee, and foot alignment. - Welded mesh & TPU upper provides high levels of breathability and supple comfort. It also equates to less stitching and seams against the foot, so you won't experience irritation or chafing. - Laces were used over buckles for a nearly infinite level of fit customization. - Two-bolt system fits SPD and all mountain pedals, making them perfect for spin class and road riding. - Rubber outsole is walkable and helps prevent slipping. - Standard Fit for on-bike support and all-day comfort. - Approx. weight: 275g (1/2 pair, Size 39)
$150.00
All-day comfort on and off the mountain. These flat pedal biking shoes provide grip and durability for all-mountain and enduro riding. An impact-resistant toe box complements the medium-stiff build for a responsive ride. The signature sticky rubber and purpose-built tread pattern keep your feet firmly planted on your pedals. The shoes have a casual look for off-the-bike style. - Regular fit with lace closure - Fast-drying synthetic upper - Textile lining - Stealth S1 rubber outsole for unbeatable grip - Medium-flex molded EVA midsole - Enjoy the comfort and performance of the removable OrthoLite sockliner - Impact-resistant Poron toe box
$45.00 - $90.00 $90.00 Up to 50% Off
Whether heading to the gym or the coffee shop, Specialized's Cadettes are an excellent balance of pedaling performance with off-the-bike cushioning and stability. They feature a Body Geometry sole and footbed for optimum alignment of hip, knee, and foot to improve performance and comfort. With a 2-bolt cleat plate, the Cadette enhances pedaling efficiency yet maintains off bike comfort. The mesh upper is breathable and comfortable, while traditional laces with Lacelock allow for easy adjustment.
$20.00
Replacement SL and SL2 shoe buckles, sold in pairs. - Sold in pairs - SL buckles for 2012 and prior shoes - SL2 buckles for 2013 and newer shoes - Low-profile - Replaces without tools
$249.99
The Politex material is constructed of several overlapping layers with different physical and mechanical properties. This compacted PVC is then coupled to two fabrics (knitted fabric and felt) that is then film dyed for long-lasting color retention. Politex offers strong resistance to rips, lacerations, stretching and fading. Politex is made in strict compliance with European regulations and is considered a "green” product. The Millennium 4 Carbon Composite Sole is injected molded carbon fiber in a matrix of nylon that creates a significantly lighter and stiffer sole that is less susceptible to changes because of aging or prolonged usage. The Soft Instep 3 Closure System is a wide, anatomically curved strap combined with a soft, thermo-formed EVA pad that distributes pressure evenly over the instep area. The Soft Instep Closure System is adjustable from both sides, to perfectly center the EVA pad over a high or low instep. The system eliminates the need for the High Instep Extender. The Soft Instep Closure System is replaceable. Sidi's Techno-3 System dials in fit along the entire length of the shoe, adapting the upper to the shape of the foot for a customized fit. Sidi's famously reliable and replaceable closures are improved by an all-new proprietary Sidi Wire material that is completely non-binding for intuitive and effortless on-the-fly adjustments. Like most Sidi small parts, the Techno-3 Buckle is serviceable and replaceable. - Reinforced heel cup. - Replaceable heel pad. - Mega last, men's EE-EEE width, precise fit.
$55.00
Comfortable elasticized shoe cover with rear zipper. - Made of elasticized Elastane for great comfort. Elastic band on the top opening and rear zipper - Reflective tape on the rear part, lateral S-logo print. - European sizes S (35-37) M(38-40) L(41-43) XL (44-46)
Page 1 of 4 Next page