Parts

M15/M26 Alloy GXP Crank Arm Bolt Kit

Original equipment on SRAM and Truvativ cranks, these chainrings also work well with other drivetrains.

- Wears and functions like other links on the chain - SIL-TEC surface treatment - Tool free installation possible - TL-CN10 is available as SM-CN900-11 - Single use

When you need to move your handlebars up, install Sunlite's Chromoly Quill Stem Extender. One end goes inside the steerer tube and your quill stem inserts into the top. It provides 8 1/4 inches of rise and is compatible only with quill stems and steerer tubes.

- One-piece bottom bracket cup set - Bearings included - Shell: 68mm - Spindle Type: OPC - Cup Material: Steel - Weight: 265 grams

- Break-Away Quick Disconnect - Two pieces: front derailleur / rear derailleur - Time-saving system for managing derailleur cables on Break-Away bikes - Light, threaded, alloy barrels with rubber noise dampener

- Upper cables measured from brake lever to detangler top plate - Lower cables are measured from detangler to cable stop/London mod - Includes adjusters compatible with most detangler styles - Use: Lower - Length: X-Long - Diameter: 1.5mm

BRAKE SHOES CLK V MTB 70mm-XTR BOLT-ON INCLUDES EXTRA SET OF PADS

DICTA LMA-8K BMX FREEWHEEL 20T 1/2 x 1/8" CHR

Dimension Alloy Bar

This is an FSA Self Extracting Crank Bolt for Hollow Carbon MegaExo Light Cranks - Designed to fit hollow carbon FSA cranks only - Includes M17 bolt, M27 self-extracting cap, and washers

Kink's One Piece Cable system incorporates all the great features found in the DX linear cable and creates a simpler brake cable system requiring minimal setup. The three preset straddle cable lengths fit with all modern frames, and the remaining straddle cable length can easily be trimmed off. This single unit cable system greatly simplifies brake installation, reduces maintenance, and increases braking stiffness. Note: The One Piece Cable system requires a slotted cable guide and cable stop and works best with modern frames using a 245mm cable stop-to-mount distance. Tech Specs - Housing: Coated linear strand - Wire: 1.5mm Pre-stretched slick wire - Length: 50" - Lug: Two-piece bind-free brass - Fits: Frames with 245mm cable stop distance - Weight: 3.0oz

M-series rear derailleurs are designed to work with 7, 8, and 9-speed Shimano-compatible mountain and road shifters. These legendary M26 rear derailleurs put cyclists of all ages back on their saddles with as little frustration as possible. - Robust composite and steel construction - Compatible with Shimano 7, 8, and 9-speed mountain and road systems

Oury single compound grips. Simple & classic. - Soft grips with raised blocks

Converts quill style forks to use threadless stems.

SRAM's PC 830 Chain offers accurate shifting, excellent durability, and superior power transfer for 8-speed drivetrains.

The Shimano Tourney TX800 front derailleur offers precise shifting with HYPERDRIVE technology for 3x7 and 3x8 speed drivetrains. - Action: Top Swing - Applicable Top-Mid tooth difference: 10T - Cable Route Type: Dual-Pull - Chain line: 47.5/50mm - Chainstay angle: 63-66° - Top gear teeth: 42T/48T - Total capacity: 20T

Enjoy quality and reliability with the Shimano Tourney 6/7-speed rear derailleur. It makes use of Shimano SIS, HyperGlide, and Double Servo technologies for smooth, accurate shifts. - Maximum cog size: 34t - Total capacity: 43t

•Designed for cantilever & caliper brakes •22.2mm (7/8") clamp •Forged alloy construction •3 finger •Pulls two brake cables with one lever •136g each

• Square taper interface • Only includes left crank

SRAM's MRX Comp Twist Shifters are simple to use and offer solid shifting and reliable construction. They shift a SRAM or Shimano front derailleur. These shifters are indexed to shift three gears, and feature micro-adjustments for perfect front derailleur alignment.

64BCD chainring for MTB cranksets

The SRAM Universal Derailleur Hanger (UDH) consolidates thousands of hanger options across the industry, while protecting your derailleur against chain jams by pivoting back and out of the way, and slipping slightly when encountering impacts. It improves shifting performance, guarantees better alignment, and works with all drivetrains. - The Universal Derailleur Hanger consolidates thousands of mountain bike derailleur standards - UDH is designed to rotate rearward in the event of impact, and features the ability to “re-rail” the chain back onto the small cog - It works with all commercially available MTB and E-MTB drivetrains from Shimano to Box to Sunrace

Serfas' BPS-100 Shimano Compatible Pads are functional and stylish, too. The triple compound pad cleans as it eliminates squeaks. Plus, the powder-coated finish adds a polished look. All hardware is included for easy installation.

Connectors feature Serfas' great dual-density design for excellent comfort. The hard inners offer a firm base and the soft outers provide a tacky and comfortable feel. And Connectors are easy to install and super secure, too.

Connectors feature Serfas' great dual-density design for excellent comfort. The hard inners offer a firm base and the soft outers provide a tacky and comfortable feel. And Connectors are easy to install and super secure, too.

Serfas' Reactive Bar Gel installs underneath your bar tape and eliminates painful, fatigue inducing road vibration so you'll ride longer, fresher, and with more comfort, period. Four pads cover your drops and bar tops and can be cut for a perfect fit. • Gel Pad Inserts Alleviate Road Vibration • Four Pads Cover Bar Tops and Drops • Cutable Pads Ensure Custom Fit • Color: Clear

Shimano chainrings offer durability and confidence-inspiring performance, and go a long way towards getting a drivetrain back to optimum working condition.

- Durable custom-molded plastic guard - Co-molded rubber exterior to help quiet chain-slap noise - Easy installation and removal

Add a rack to your frame, even if you don’t have rack mounts. Allows standard rack stays to be bolted directly to the seat collar, for a clean and simple look. Made from lightweight aluminum for durability, with threaded inserts to bolt the stays directly into the seat clamp. - 35mm inner diameter fits all alloy Specialized MTB frame designs with 30.9mm posts and 35mm O.D. seat tubes. - 37mm inner diameter fits all carbon Specialized MTB frame designs with 30.9mm posts and 37mm O.D. seat tubes.

Serfas' Synthetic Cork Bar Tape offers great comfort, grip and vibration absorption. This light, stretchy tape is easily installed thanks to the adhesive back and adds a touch of class to any bike. • Thin, Lightweight and Stretchable • Adhesive Backing for Easy Installation • Shock Absorbent • Washable

- Precise fit and smooth function - Great cable travel range - Shielded cables for durability - Includes upper and lower cables - Use: 1-1/8" BMX

Jagwire's Sport Inline Adjusters are installed on your shift cable housing sections so that you can fine-tune the shift cable tension by hand (without tools). They're great for keeping your shifting dialed in. They're precision made of lightweight aluminum and nylon for easy use and durability. To install them, remove the cables and housing sections, cut the top housing sections in two and rejoin the sections with the Inline Adjusters in the middle.

- Cleat covers to avoid wear and provide stability and grip while walking - Lightweight, flexible and durable

- Steel body - Steel cups - Chromoly spindle - Sealed bearings - Interface: English - Square Taper JIS - Weight: 305-320 grams

• Quick-release seatpost clamp • Full stainless-steel construction • Rubber-covered handle for a great grip

AL-7 LH ALLOY CRANK ARM SQUARE-TAPER 175mm SIL

SRAM's X3 shifters feature two-lever trigger shifting performance at a great price. With Exact Actuation 1:1 cable pull ratios, these shifters deliver quick, accurate shifts.

Shimano M03 Metal Disc Brake Pads - OEM pad for XT BR-M755 caliper - Sintered Metal pad with consistent, high stopping power in wet or dry conditions and excellent durability

Bearings for maintaining and rebuilding DT Swiss hubs. - DT Swiss 6803 Bearing

SS-8106 ALLOY LH ARM 170mm BLK

SS-8106 ALLOY LH ARM 170mm SIL

Dimension Chainrings. - No ramps, pins, or shift aids

Best suited for the acknowledged weight weenie and thin grip lovers. 50 grams, standard grip length - 5 1/8", installed DIA. 30 mm, weight plus or minus 5%, 1 set of bar plugs included. - 50 Grams - Standard Grip Length – 5 1/8" - Installed Dia. 30mm - Weight plus or minus 5% - Made for 22mm bars (can fit applications down to 19mm) - Bar Plugs included - *Install Bar Plugs first for the protection of grips and ease of installation

Changing gears is a snap with the Acolyte shifter. Discrete thumb and index levers and a crystal clear gear indicator simplify shifting decisions, making each action and reaction easy to understand. And, of course, it retains the light action and positive indexing that microSHIFT has made its name on. - Ergonomic trigger placement - Clear and easy to read indicator

Origin-8 Classic Linear-Pull Brakes are a great upgrade or replacement brake for your ride. Available in both front and rear, they feature forged aluminum construction with dual hex screw tension adjustment for simple set-up.

SRAM's PC-850 Chain makes a trusty partner over hill and dale. It's easy to install, too, thanks to the no-tools-needed PowerLink. Quiet, smooth, reliable and very affordable, the PC-850 is a fine value.

Shimano's Tourney long cage rear derailleur incorporates advanced Shimano functions and styling that sets the standard for entry level components. - TY model comes with resin bracket and plate body for reduced weight - Zinc-plated adjustment screws for corrosion resistance - MegaRange compatible - Includes frame hanger - Maximum cog size: 34t - Total capacity: 43t

- Fits most platform pedals - Two wooden riser blocks w/durable rubber band - Adds 3/4" to each side (1-1/2" total)

Specialized's S-Wrap Roubaix Handlebar Tape boasts a stylish suede finish and elastomer gel cushioning for awesome vibration damping and comfort.

Serfas' DBPA1 MTB Avid Compatible Disc Pads offer long-lasting, reliable braking. They're semi-metallic for durability and fit with Avid BB7 Mechanical and Juicy Hydraulic brakes.

Serfas' DBPA2 MTB Avid Compatible Disc Brake Pads offer long-lasting, reliable braking. They're semi-metallic for durability and made for Avid BB5 mechanical-disc brakes.

Serfas' DBPA4 MTB Avid Compatible Disc Brake Pads offer long-lasting, reliable braking. They're semi-metallic for durability and made for Avid Elixir hydraulic brakes.

Serfas' DBPH1 MTB Hayes Compatible Disc Pads offer long-lasting, reliable braking. They're semi-metallic for durability and are compatible with Hayes HFX Hydraulic and MX-1 Hydraulic brakes.

Serfas' DBPM5 MTB Magura Compatible Disc Brake Pads offer long-lasting, reliable braking. They're semi-metallic for durability and made for Magura MT-2/4/6/8 hydraulic brakes.

Serfas' DBPS1 MTB Shimano Compatible Disc Pads offer long-lasting, reliable braking. They're semi-metallic for durability and are compatible with all current Shimano disc brakes.

Serfas' DBPS2 MTB Shimano Compatible Disc Pads offer long-lasting, reliable braking. They're semi-metallic for durability and are compatible with Shimano XT 4 Piston BR-M775 Brakes.

Serfas' DBPS3 MTB Shimano Compatible Disc Pads offer long-lasting, reliable braking. They're semi-metallic for durability and are compatible with Shimano Deore Hydraulic BR-M555 brakes.

Serfas' innovative brake pads provide the ultimate reliable stopping power. - Semi-Metallic For Durability - Compatible With Shimano 2011 and Newer XT, XTR & SLX Brakes - Applicable Hardware Included

Restore stopping power with a set of Serfas disc brake replacement pads. Compatibility: - SRAM 700 B1 HRD - Apex 1 - eTap HRD - Force 1 - Force 22 - HRR - Level TLM - Level Ultimate - Red 22 B1 - Rival 1 - Rival 22 - S900(Aero) HRD